Chemicals

WS730 is a water-based, high activity liquid flux designed to offer low-spattering and excellent wetting, even to difficult-to-solder parts. WS730 is formulated for a variety of electronic, electrical and industrial applications, including wire, cable, and terminal lead tinning and soldering, flat...
RMA 202-35 is a medium solids, mildly activated liquid flux with a solvent rosin activation formulated to provide a post-process flux residue that is both insulating and non-hydroscopic and does not require cleaning.  As a mildly activated rosin based flux, RMA 202-35 offers a wide process...
RMA 202-25 is a medium solids, mildly activated liquid flux with a solvent rosin activation formulated to provide a post-process flux residue that is both insulating and non-hydroscopic and does not require cleaning.  As a mildly activated rosin based flux, RMA 202-25 offers a wide process...
RAD Flux #1 is a water-based, inorganically activated liquid flux designed for radiator production applications. Though designed for application via foam fluxer, RAD Flux #1 may also be applied by dipping or brushing with favorable results.  Since RAD Flux #1 is highly corrosive, all residues...
RA-301 is a fully activated rosin-based flux formulation containing 35% solids. RA-301 has a very wide process window, which makes it an acceptable alternative to a variety of environments and process applications.  RA-301 has a high activity level that provides bright, shiny solder joints and...
NC263UR is a rosin-free, resin-free, halide-free, no-clean wave solder flux designed to promote enhanced wetting during the wave soldering process.  NC263UR has a higher activity level and lower surface tension than other no-clean liquid fluxes.  NC263UR performs well with bare copper,...
General Purpose Flux Thinner is a solvent that is used to thin Water Soluble, No Clean and RMA fluxes in foaming and some spray applications.  Common Flux Thinner is typically used in conjunction with the AIM n.020 Titration Kit.  Use of Common Flux Thinner is suggested when the flux acid...
NF-105 is a water soluble heat exchange flux offering superior performance for your complete brass & copper heat exchange process. This flux is to be utilized for your tube, bake, header dip, & hand soldering.  It is compatible with tin/lead or lead-free alloys.  NF-105 offers a...
Flux 657 is a water-based, inorganically activated liquid flux designed specifically for heat exchange.  This water soluble product provides excellent wetting, as well as minimal residue.  It also provides a high dilution ratio, and is zinc chloride free. The flux is for high speed...
AIM’s Battery Fabrication flux allows the rapid evaporation needed in high volume cast-on-strap manufacturing. This solvent-based flux contains no chlorides or heavy metals to effect long-term performance and is environmentally safe. Another key characteristic is the wide window of operation...
AIM’s Fast Dry #100 Battery Flux allows the rapid evaporation needed in high volume cast-on-strap manufacturing. This alcohol-based flux contains no chlorides or heavy metals to effect long-term performance and is environmentally safe. Another key characteristic is the wide window of...