Drut rdzeniowy RX18
RX18 no clean flux core wire solder was developed to provide excellent soldering results with all alloys and surface finishes. Engineered for robotic soldering, RX18 promotes thermal transfer, fast wetting and rapid solder penetration into plated through holes or surface mount interconnections. RX18 specialized packaging ensures consistent, accurate, jam-free wire feeding. RX18 post solder residues are minimal, clear and pass IPC-004A and IPC-004B SIR and corrosion requirements and do not require cleaning.
Low Voids/Skips, Low Spatter, Extends Solder Tip Life, ROL0 per IPC J-STD-004, REACH and RoHS Compliant (Lead-Free), Fast Wetting/Feed Rates.
RX18 is available in multiple lead-free alloys. Additional alloys and diameters may be available upon request.
Best results are obtained with properly sized solder iron tip with a temperature between 300° – 400°C (575° – 750°F) for leaded alloys and 370° – 425°C (700° – 800°F) for lead-free alloys.
Store cored wire in a clean, dry area away from moisture and sunlight. Do not freeze this product. 7 Years at < 85°F (< 29°C)
RX18 can be cleaned with commercially available flux removers. IPA is not recommended. Contact AIM for specific information.
Use with adequate ventilation and proper personal protective equipment. Refer to the accompanying Safety Data Sheet for any specific emergency information. Do not dispose of any hazardous materials in non-approved containers.
Więcej drutu z rdzeniem
Dystrybucja hurtowa i zaopatrzenie przedsiębiorstw
Nasze produkty, przeznaczone do dystrybucji hurtowej, są dostępne dla hurtowników prowadzących magazyny, dostawców detalicznych oraz partnerów komercyjnych zarządzających flotą lub zapasami magazynowymi. Zapewniamy obsługę zamówień o dużej skali, skalowalny system składania zamówień oraz niezawodne łańcuchy dostaw w zakresie napraw ogólnych, konserwacji i dystrybucji komercyjnej. Skontaktuj się z nami już dziś w celu omówienia warunków cenowych umowy lub regionalnych programów dystrybucji.









